TÀI LIỆU SỐ
Danh mục TaiLieu.VN
Kết quả 1-12 trong khoảng 336
Bài viết trình bày kết quả nghiên cứu thực nghiệm xác định lượng phun và góc đánh lửa phù hợp cho động cơ xe máy sử dụng xăng sinh học (hỗn hợp xăng và ethanol sinh học) có tỷ lệ ethanol cao. Thử nghiệm được thực hiện với động cơ xe máy phun xăng điện tử trên băng thử động cơ chuyên dụng.
11 p bvu 21/07/2024 9 0
Phương pháp điều khiển hệ thống cung cấp điện cho tàu điện sử dụng mô hình Takagi-Sugeno mờ cải tiến
Bài viết đưa ra phương pháp điều khiển mới dựa trên mô hình Takagi-Sugeno mờ cải tiến. Phương pháp đề ra có một số ưu điểm: thứ nhất, đánh giá được tính ổn định của hệ thống điều khiển; thứ hai, khả năng dập tắt dao động, bám theo giá trị đặt của lực tiếp xúc rất tốt và thứ ba, đảm bảo chất lượng điều khiển bền vững khi có...
13 p bvu 21/07/2024 9 0
Bài viết trình bày kết quả nghiên cứu và thiết kế hệ bám điện thủy lực cho pháo AK-176M có xét đến tính phi tuyến, nhiễu. Nội dung chi tiết bài báo thể hiện quá trình nghiên cứu và xây dựng bộ điều khiển thích nghi cho hệ thống bám điện thủy lực pháo AK-176M trên tàu Hải quân, bao gồm cả các yếu tố như độ chính xác của hệ thống, tương tác...
8 p bvu 21/07/2024 8 0
Nghiên cứu bộ điều khiển hybrid PID cho hệ thống treo chủ động
Trong nghiên cứu này, nhóm tác giả đề xuất sử dụng thuật toán lai Hybrid PID để điều khiển cho mô hình một phần tư hệ thống treo ô tô. Khác với thuật toán PID truyền thống, thuật toán lai có khả năng hiệu chỉnh các hệ số kP, kIvà kD một cách linh hoạt theo các điều kiện dao động cụ thể.
6 p bvu 21/07/2024 7 0
Tính toán hệ thống truyền động điện cho xe tự chế
Bài viết Tính toán hệ thống truyền động điện cho xe tự chế trình bày các nội dung chính sau: Xe dùng động cơ truyền thống; Xe điện; Xe tự chế; Các nghiên cứu trong và ngoài nước; Tính toán công suất cho động cơ điện; Xây dựng đặc tính kéo của xe khi sử dụng động cơ điện.
8 p bvu 21/07/2024 12 0
Bài viết tập trung nghiên cứu chế tạo tấm bảo vệ nhiệt dùng trong cơ khí đóng tàu được làm từ vật liệu compsite cốt vải cacbon nền phenolic. Trên cơ sở phân tích đặc tính nhiệt động học của nhựa phenolic/đóng rắn hexamin, đã tiến hành các thực nghiệm để ổn định công nghệ.
5 p bvu 21/07/2024 6 0
Khảo sát chiến lược phun ảnh hưởng đến quá trình cháy của động cơ cháy bằng nén với nhiên liệu xăng
Mục tiêu của nghiên cứu này là điều tra chiến lược điều khiển thời điểm phun của tia phun chính với nhiên liệu ethanol pha trộn với xăng: E20 và ở mức luân hồi khí thải cao EGR 25%. Với nhiên liệu có tính chống tự cháy cao và tỷ lệ luân hồi khí thải cao để tạo được chế độ cháy hòa trộn trước chiếm phần lớn trong quá trình cháy, để thấy...
15 p bvu 21/07/2024 8 0
Phân loại mặt đường sử dụng mô hình học máy có giám sát trên bộ dữ liệu của cảm biến quán tính
Bài viết đề xuất lựa chọn bộ dữ liệu tối ưu để đánh giá hiệu năng phân loại 3 loại mặt đường là đường nhựa, đường đất và đường đá trên một số mô hình học máy cơ bản trên bộ dữ liệu công khai. Kết quả cho thấy độ chính xác đạt được trên 90% khi phân loại đường nhựa, đường đất, đường đá.
5 p bvu 21/07/2024 7 0
Mô phỏng đặc trưng quá trình cháy động cơ dual fuel sử dụng syngas-biogas-hydrogen
Việc phối hợp sử dụng syngas, biogas và hydrogen trên động cơ đốt trong là giải pháp hữu hiệu góp phần thực hiện chuyển đổi năng lượng tại Việt Nam. Bài viết nghiên cứu ảnh hưởng của phương pháp cung cấp hỗn hợp nhiên liệu khí syngas-biogas-hydrogen tương ứng 40-30-30% thể tích đến tính năng của động cơ dual fuel Vikyno RV165.
14 p bvu 21/07/2024 11 0
Nghiên cứu thiết kế và chế tạo trạm lắp ráp thủ công có thể tùy biến theo nhân trắc học
Duy trì và nâng cao hiệu suất làm việc của công nhân tại các khu vực lắp ráp trong các dây chuyền sản xuất là một trong những vấn đề quan trọng trong việc gia tăng tính hiệu quả trong sản xuất công nghiệp hiện nay. Bài viết tập trung vào việc nghiên cứu thiết kế và kiểm tra độ bền trạm lắp ráp thủ công dành cho công nhân.
6 p bvu 21/07/2024 6 0
Ảnh hưởng của chế độ hóa già đến tổ chức tế vi và cơ tính mối hàn Ti6Al4V với Ti-CP
Trong nghiên cứu này thực hiện hàn TIG hai tấm khác loại là Ti-CP (ASTM Grade 2) với Ti6Al4V, tiến hành thử kéo mối hàn ở các trạng thái khác nhau gồm mối hàn không được xử lý nhiệt, được xử lý nhiệt gồm tôi và hóa già ở một số nhiệt độ khác nhau, khảo sát độ cứng mối hàn, khảo sát sự thay đổi tổ chức tế vi vùng mối hàn, xem xét sự phá...
6 p bvu 21/07/2024 8 0
Nghiên cứu giải pháp công nghệ chế tạo vỏ liều đạn 548B từ hợp kim nhôm bằng mô phỏng số
Bài viết trình bày giải pháp công nghệ chế tạo vỏ liều đạn 548B từ hợp kim nhôm. Dạng kết cấu vỏ liều đạn liền (1 chi tiết) được đề xuất thay thế kết cấu ghép hiện tại. Công nghệ ép chảy hỗn hợp và dập vuốt biến mỏng thành được ứng dụng để tạo hình chi tiết từ phôi thanh hợp kim nhôm.
7 p bvu 21/07/2024 6 0
Bộ sưu tập nổi bật